CDS® Hinge 360°
CDS® Hinge 360° - for the individual rehabilitation
CDS® Hinge 360°
Features
- Individual adjustment of the spring tension up to 5,2 Nm
- Spring tension can be switched on and off without tools and without varying the set spring tension
- Range of motion can be limited
- Immobilisation possible
Hinge 360°

- The redression range can be adjusted in 15° increments
- 90° redression range can be positioned freely
- For therapy in extension or flexion
- For treatement of severe extension or flexion deficits
Casting options
Hinge
The rods are fixed to the hinges and can be riveted to the cast.
Adapter Hinge
The rods can be unscrewed and removed from the adapter-hinges. So they can be poured into the cast.
Materials and Width
CDS® (3 mm thickness) | |||
Aluminium | 20 mm | 24 mm | |
Stainless steel | 16 mm | 20 mm | 24 mm |
CDS® Nano (2 mm thickness) | |||
Aluminium | 16 mm | ||
Stainless steel | 16 mm |
CDS® Hinge 360° size

CDS® Hinge 360° size
Size chart and article numbers
CDS® Hinge 360° | Art.-No. left | Art.-No. right |
---|---|---|
CDS® Hinge 360° 16 mm Stainless steel | 812-200-L | 812-200-R |
CDS® Hinge 360° 20 mm Stainless steel | 812-205-L | 812-205-R |
CDS® Hinge 360° 24 mm Stainless steel | 812-210-L | 812-210-R |
CDS® Hinge 360° 20 mm Aluminium | 812-235-L | 812-235-R |
CDS® Hinge 360° 24 mm Aluminium | 812-240-L | 812-240-R |
To complete the hinge, convenient anchors can be configured. You can also select different versions, widhts and materials, so the anchor match the hinge optimally.
Stabilisers can be configuered to match the hinge selected. You can select stabiliser or adapter-stabiliser, aluminium or stainless steel as well as different widths.
CDS® Adapter Hinge 360° size

CDS® Adapter Hinge 360° size
CDS® Adapter Hinge 360° | Art.-No. left | Art.-No. right |
---|---|---|
CDS® Adapter Hinge 360° 16 mm Stainless steel | 812-250-L | 812-250-R |
CDS® Adapter Hinge 360° 20 mm Stainless steel | 812-255-L | 812-255-R |
CDS® Adapter Hinge 360° 24 mm Stainless steel | 812-260-L | 812-260-R |
CDS® Adapter Hinge 360° 20 mm Aluminium | 812-285-L | 812-285-R |
CDS® Adapter Hinge 360° 24 mm Aluminium | 812-290-L | 812-290-R |
To complete the hinge, convenient anchors can be configured. You can also select different versions, widhts and materials, so the anchor match the hinge optimally.
Stabilisers can be configuered to match the hinge selected. You can select stabiliser or adapter-stabiliser, aluminium or stainless steel as well as different widths.